What size tablecloth do I need?
To determine the size of the tablecloth you need, you’ll first need to measure your table. Follow these steps:
1. Measure the length of your table from end to end.
2. Measure the width of your table from side to side.
3. Consider how much overhang you want. Typically, a tablecloth overhangs around 6 to 12 inches (15 to 30 cm) on each side, but this can vary based on personal preference and the occasion.
Once you have these measurements, add twice the desired overhang to both the length and width of your table. For example, if your table is 60 inches long and 30 inches wide, and you want a 10-inch overhang:
– Length: 60 inches (table length) + 10 inches (overhang on each end) + 10 inches (overhang on the other end) = 80 inches
– Width: 30 inches (table width) + 10 inches (overhang on each side) + 10 inches (overhang on the other side) = 50 inches
So, you would need a tablecloth that is approximately 80 inches by 50 inches.
If your tablecloth size falls between standard sizes, it’s usually best to go with the larger size to ensure adequate coverage.
How to buy a tablecloth the right size ?
Here is the step-by-step guide to how to buy a tablecloth in the right size for Your Table.
-
Measure Your Table:
- Begin by measuring the length and width of your table. Use a tape measure to get accurate dimensions, accounting for any table extensions if applicable.
- Write down these measurements, as you’ll need them when selecting a tablecloth.
-
Determine the Drop Length:
- Decide on the desired drop length, which refers to how much you want the tablecloth to hang over the edges of the table.
- For a formal look, a drop length of 12 to 15 inches is recommended. For a more casual look, 6 to 8 inches is sufficient.
- Keep in mind the purpose of the tablecloth. If it’s for everyday use, a shorter drop may be more practical.
-
Calculate the Size:
- Add twice the drop length to both the length and width of your table measurements. This accounts for the overhang on all sides.
- For example, if your table measures 60 inches long and 36 inches wide, and you want a 12-inch drop, the calculated size for your tablecloth would be: Length: 60 inches + (2 × 12 inches) = 84 inches Width: 36 inches + (2 × 12 inches) = 60 inches
- Make sure to round up to the nearest size available if your calculated measurements fall between standard sizes.
-
Consider Shape and Style:
- Take into account the shape of your table when selecting a tablecloth. Rectangular tables require rectangular or oval tablecloths, while round tables need round tablecloths.
- Consider the style of the tablecloth, such as fabric, color, and pattern, to complement your décor and occasion.
-
Test the Fit:
- Once you’ve purchased the tablecloth, test the fit on your table. Ensure that it hangs evenly on all sides and reaches the desired drop length.
- Make adjustments as needed, folding or hemming the tablecloth if it’s too long or doesn’t fit properly.
Example: How to Select the Right Size Tablecloth for Your Table
- You have a rectangular table measuring 60 inches (152 cm) long and 40 inches (102 cm) wide.
- You prefer a casual setting with a 6-inch (15 cm) drop.
Using the formula, you get:
- Length: 60 inches (table length) + (2 x 6 inches drop) = 72 inches (ideal tablecloth length)
- Width: 40 inches (table width) + (2 x 6 inches drop) = 52 inches (ideal tablecloth width)
Therefore, you would need a rectangular tablecloth with dimensions of 72 inches x 52 inches (183 cm x 132 cm).
How to measure for a Round Tablecloth
Measuring for a round tablecloth is a bit different from measuring for a rectangular one. Follow these steps to accurately measure for a round tablecloth:
Measure the Diameter:
Determine the diameter of your round table by measuring straight across the center from one side to the other. This measurement represents the width of the table.
Consider the Overhang:
Decide how much overhang you want. Typically, a round tablecloth overhangs around 6 to 12 inches (15 to 30 cm) from the edge of the table. This overhang helps to ensure the tablecloth hangs nicely and adds a decorative touch.
Calculate the Size:
Add twice the desired overhang to the diameter of the table. For example, if your round table has a diameter of 60 inches and you want a 10-inch overhang:
Diameter: 60 inches (table diameter) Overhang: 10 inches (desired overhang)
Total size of the tablecloth = Diameter + (2 × Overhang) Total size = 60 inches + (2 × 10 inches) Total size = 60 inches + 20 inches Total size = 80 inches
So, for a round table with a 60-inch diameter and a desired overhang of 10 inches, you would need a round tablecloth that is approximately 80 inches in diameter.
By following these steps, you can ensure that your round tablecloth fits your table perfectly, providing an elegant and cohesive look for your dining area or event.
A quick & easy round tablecloth size chart
| Your round table seats: | 4 | 4-6 | 6-8 | 8-10 |
| and it’s this wide: | 36″ | 48″ | 60″ | 72″ |
| you need this round tablecloth size: | 70″* | 70″ | 90″ | 90″** |
How to measure for a Square Tablecloth
Measuring for a square tablecloth follows a straightforward process. Here’s how to do it:
Measure the Table:
Start by measuring the length of one side of your square table. Ensure that you measure from one edge to the opposite edge. This measurement will be your table’s width.
Consider the Overhang:
Decide how much overhang you want on each side of the table. Typically, a square tablecloth overhangs around 6 to 12 inches (15 to 30 cm) on each side. Overhang adds a decorative touch and ensures the tablecloth hangs nicely.
Calculate the Size:
Add twice the desired overhang to the length of one side of your table. Since a square table has equal sides, you’ll apply this measurement to both dimensions. For example, if your table is 40 inches on each side and you want a 10-inch overhang:
Side Length: 40 inches (table-side length) Overhang: 10 inches (desired overhang)
Total size of the tablecloth = Side Length + (2 × Overhang) Total size = 40 inches + (2 × 10 inches) Total size = 40 inches + 20 inches Total size = 60 inches
So, for a square table with each side measuring 40 inches and a desired overhang of 10 inches, you would need a square tablecloth that is approximately 60 inches on each side.
Following these steps ensures that your square tablecloth fits your table perfectly, enhancing the overall look of your dining area or event with a polished and cohesive appearance.
How to measure for a Rectangle Tablecloth
Measuring for a rectangular tablecloth is similar to measuring for a square one, but you’ll need to consider the length and width separately. Here’s how to do it:
Measure the Table Length:
Start by measuring the length of your rectangular table from one end to the other. Ensure that you measure along the longest side. This measurement represents the length of your table.
Measure the Table Width:
Next, measure the width of your rectangular table from one side to the other along the shorter side. This measurement represents the width of your table.
Consider the Overhang:
Decide how much overhang you want on each side of the table. As with square and round tablecloths, a typical overhang is around 6 to 12 inches (15 to 30 cm) on each side.
Calculate the Size:
Add twice the desired overhang to both the length and width of your table. For example, if your table is 60 inches long and 30 inches wide, and you want a 10-inch overhang:
-
- Length: 60 inches (table length) + 10 inches (overhang on each end) + 10 inches (overhang on the other end) = 80 inches
- Width: 30 inches (table width) + 10 inches (overhang on each side) + 10 inches (overhang on the other side) = 50 inches
So, you would need a rectangular tablecloth that is approximately 80 inches by 50 inches.
By following these steps, you can ensure that your rectangular tablecloth fits your table perfectly, providing an elegant and cohesive look for your dining area or event.
A quick & easy rectangular tablecloth sizes chart
Hate doing the math? Don’t worry! Just refer to this chart, and be sure to bookmark it for reference.
| Your rectangular table seats: | 6-8 | 8-10 | 10-12 |
| And it’s this long: | 62″-72″ | 80″-92″ | 94″-105″ |
| you need this rectangular tablecloth size: | 70″ x 90″ | 70″ x 108″ | 70″ x 120″ |
FAQ: How to buy a tablecloth the right size
Q: How do I know what size tablecloth I need for my table?
A: To determine the size of the tablecloth you need, start by measuring your table. For round tables, measure the diameter. For square or rectangular tables, measure the length and width. Then, consider how much overhang you want on each side. Finally, calculate the total size of the tablecloth needed by adding twice the desired overhang to the dimensions of your table.
Q: What is the standard overhang for a tablecloth?
A: The standard overhang for a tablecloth is typically around 6 to 12 inches (15 to 30 cm) on each side. However, the amount of overhang can vary based on personal preference and the occasion.
Q: Should I choose a linen tablecloth or another material?
A: The choice of material for your tablecloth depends on your preference and the occasion. Linen tablecloths offer a classic and elegant look, while polyester blends are more practical for everyday use. Consider factors such as durability, ease of cleaning, and how well the fabric complements your table decor.
Q: How do I ensure the tablecloth complements my table decor?
A: When selecting a tablecloth, consider the design or pattern that complements your style and the overall aesthetic of your dining area or event. Whether you prefer solid colors, intricate patterns, or seasonal motifs, choose a design that enhances the ambiance of your space.
Q: What if my tablecloth size falls between standard sizes?
A: If your tablecloth size falls between standard sizes, it’s usually best to choose the larger size to ensure adequate coverage. A slightly larger tablecloth can be adjusted or folded to fit your table neatly while still providing an elegant look.
Q: Can I use the same tablecloth for different table shapes?
A: While it’s possible to use the same tablecloth for different table shapes, it may not always fit perfectly. Round tablecloths are specifically designed for round tables, while square and rectangular tablecloths are tailored to fit those shapes. Using a tablecloth that matches the shape of your table will ensure the best fit and appearance.
Q: How do I care for my tablecloth to maintain its quality?
A: Follow the care instructions provided by the manufacturer to maintain the quality of your tablecloth. This may include machine washing, gentle drying, and ironing at low temperatures. Proper care will help prolong the life of your tablecloth and keep it looking its best for years to come.
Conclusion:
Selecting the right size tablecloth is essential for creating a cohesive and inviting dining space. By following these steps and considering factors such as table shape, measurements, overhang, material, and design, you can confidently choose the perfect tablecloth for your table. Whether you’re hosting a formal dinner party or enjoying a casual meal with family and friends, a well-fitted tablecloth adds the perfect finishing touch to any occasion.